Emergency callout
Cold taps and a cold shower? There are a handful of common causes, and Paul knows them all. He finds it fast and puts it right.
fast local response, often same-day
Losing hot water is grim, no shower, no washing up, and usually no obvious reason why. The good news is it is normally one of a handful of causes, and after 40 years Paul recognises them fast. It could be the boiler, a diverter valve, a thermostat, an immersion heater or a pressure problem.
Rather than guessing, Paul diagnoses the actual cause and fixes that, whether your hot water comes from a combi, a cylinder or an immersion heater. He is Gas Safe registered (221708), so the boiler side is fully covered.
Cold taps
01
Heating on but no hot water?
If the heating still works but the taps are cold, it often points to a diverter valve or a hot water fault rather than the whole boiler. Paul narrows it down quickly.
02
Everything cold?
No heat and no hot water usually means a boiler fault, low pressure or a lockout. Paul checks the boiler and pressure to find the cause.
03
Fixed at the source
Whether it is a valve, thermostat, immersion element or a boiler fault, Paul fixes the actual cause so the hot water stays back on.
No surprises
A typical job
The radiators are warm but every hot tap runs cold. Paul recognises the classic sign of a stuck diverter valve inside the combi, replaces it, tests the hot water is back at every tap and checks the boiler is running right. Showers back on the same day.
A fair fixed price, agreed with Paul before he starts. No call-out fee bolted on the end, no hidden extras. If a job turns out bigger than it looked, he stops and tells you first.
Fastest way to Paul
For anything urgent, ring Paul direct. You get him, not a call centre, and he will tell you straight when he can be there. Prefer to leave the details? Use the quick form.
Straight answers
On a combi that usually means the diverter valve has stuck, so the boiler heats the radiators but not the taps. It is a common, fixable fault, and Paul sorts it regularly.
Yes. A dead immersion is normally a failed element or thermostat. Paul diagnoses which and replaces it so you have hot water again.
No hot water is a job Paul treats as urgent. Working locally, he can often get to Liverpool and Knowsley homes the same day, fast local response, often same-day.
It can be the boiler, a valve, a thermostat or an immersion, which is exactly why Paul diagnoses it properly instead of guessing. You only pay to fix what is actually wrong.
Do not wait for it to get worse
fast local response, often same-day. You get Paul on the phone, a Gas Safe engineer with 40 years behind him.